Orange Porsche 911 (992.1 / 992.2) in a light grey studio with mileage blocker connected — mileage freezer.
SAVE 17%
2019-present
Porsche

Porsche 911 (992.1 / 992.2) Mileage Blocker

£249.00£299.00
Plug & play Multiple modes Speedometer retained Quick removal option available Price varies depending on options

Mileage blocker for the Porsche 911 992 generation covering both 992.1 and 992.2. Compatible with 911 Carrera, Carrera S, Carrera 4, Carrera 4S, Carrera T, Targa 4, Targa 4S, Turbo, Turbo S, GT3, GT3 RS, GT3 Touring, Sport Classic, Dakar, and S/T. Plug & Play, no cutting or soldering, no permanent modifications, fully undetectable. Sometimes referred to as a mileage freezer, the Porsche 911 (992.1 / 992.2) Mileage Blocker works by intercepting speed and distance data on the CAN-bus network before it reaches the instrument cluster and memory modules, rather than altering any stored odometer value.

Select your vehicle options

Model Version
Cable Type

Extended cable adds +£39.00 and includes the quick-removal option.

In stock — ships within 1–2 working days

Not sure which variant fits? Send us your car details before ordering — we'll confirm the right fit.

Include your vehicle make, model, model year or generation, and a photo of the instrument cluster if possible.

"Works exactly as described — fitted in under 15 minutes and does exactly what it says on the tin. Very happy with the quality."

— Doel N. · Verified Yotpo buyer

Why buy direct from MileageBlocker.com?

Original Developer & ManufacturerEvery Unit Tested at our WorkshopGenuine 12-Month Manufacturer WarrantyUK Support AvailableSecure & Guaranteed Worldwide Shipping

Key features

  • Quality connections — premium-quality plugs and heat-resistant cables for a neat, vehicle-specific fit.
  • Discreet installation — integrates with the vehicle wiring at the specified fitting location.
  • Fully removable — connects without cutting or soldering; remove cleanly at any time.
  • Plug & Play installation — no cutting, soldering, or coding required.
  • Control during testing — can be activated and deactivated while stationary or in motion during permitted off-road testing.
  • Remembers the last setting — the active mode is retained between starts; no need to reactivate each time.
  • No mileage catch-up — mileage not recorded while active is never added back when the device is removed.
  • Normal speed display — the speedometer reads correctly in all active modes.
  • Warning-light limitation — on 2025-onwards 992.2 vehicles, a check-engine light may appear when the device is installed or activated.
  • Optional extended cable — a long-cable version is available to make the module easier to access; select when ordering.
  • Not detectable after removal — once removed, use of the device cannot be detected through diagnostics. Remove it before any diagnostic inspection.

Operation & Functional Modes

Activation & Mode Change

992.1: Press the Return/Back button on the steering wheel 3 times. | 992.2: Flash the high beams 4 times.

992.1

Mode 10% count
Speedometer works normally
Mode 2100% count
Normal operation / stock

992.2

Mode 10% count
Speedometer works normally
Mode 210% count
Speedometer works normally
Mode 3100% count
Normal operation / stock

The speedometer and cruise control work normally in all active modes. On 911 992.2 vehicles from 2025 onwards, a check-engine light may appear when the device is installed or activated.

How it works

Every modern vehicle uses a CAN-bus network — a high-speed digital communication system that links the engine control unit, instrument cluster, gearbox, ABS, and dozens of other modules. Distance data travels across this network continuously, and the instrument cluster reads those signals to update the odometer.

The Porsche 911 (992.1 / 992.2) Mileage Blocker installs in-line on the specific CAN-bus line that carries distance pulses toward the instrument cluster. It intercepts those signals at the wiring level — before they reach the cluster — and, depending on the selected operating mode, suppresses them entirely or reduces them to a set percentage.

The device uses vehicle-specific, original-type connectors and fits entirely within the existing wiring loom. No wires are cut, no soldering is required, and no coding or software changes are made to the vehicle. Removing the device restores the vehicle to its exact factory state.

Because the device operates at the physical wiring layer — not through the OBD-II port or any software interface — its presence cannot be detected by standard diagnostic equipment. It leaves no trace in the vehicle's fault memory. The device retains the last selected mode between ignition cycles.

Vehicle behaviour notes

No warnings or alarms. No effect on vehicle electronics or driving systems.

Extended cable with quick-removal option+£39.00

The standard cable supplied with the device is sized to reach the installation point directly. The extended cable option adds approximately 45 cm of additional cabling, allowing you to route the module away from the installation point to a more accessible location.

This is particularly useful if you want to tuck the module behind a trim panel that can be removed without tools — for example, a kick panel, lower dashboard cover, or boot side trim.

The quick-removal feature means the module can be disconnected and removed in seconds without disturbing the original wiring — useful for track days, MOT inspections, or any situation where you want the device temporarily out of the vehicle.

To add the extended cable, select "Extended cable with quick removal option" from the Cable Type selector above before adding to cart.

Important information

This product is designed for off-road, motorsport, dyno testing and vehicle development use. It should not be used to alter the recorded mileage of any vehicle being offered for sale. Please ensure your use is in accordance with the laws that apply in your country. On 911 992.2 vehicles from 2025 onwards, a check-engine light may appear when the device is installed or activated.

Compatible variants

Years supported: 2019 – present

Choose the matching model year, generation and any listed instrument-cluster, connector or equipment option before ordering. If the correct version is unclear, contact support before purchase.

Compatible with

  • Porsche 911 992.1 (2019–2023), including Carrera, Carrera S, Carrera 4, Carrera 4S, Carrera T, Targa 4, Targa 4S, Turbo, Turbo S, GT3, GT3 RS, GT3 Touring, Sport Classic, Dakar, S/T
  • Porsche 911 992.2 (2024–present), including Carrera, Carrera S, Carrera 4, Carrera 4S, Turbo, Turbo S, GT3. If you are searching for a mileage freezer for the Porsche 911 (992.1 / 992.2), this is the correct device — select your generation and connector type above

Covers all flat-six variants.

Not sure if this fits your vehicle? Contact us with your make, model, year, and a photo of the instrument cluster and we'll confirm.

Specifications

SKURC-POR-911-992-1
InstallationPlug & Play installation - no wiring modifications and no coding required
Activation992.1: Press the Return/Back button on the steering wheel 3 times. | 992.2: Flash the high beams 4 times.
Warranty12 months warranty
Weight0.4 kg
Dimensions20 x 10 x 2 cm
Cable typeShort cable | Long cable with quick removal
Years supported2019-present

Compatibility & installation

Use the fitting instructions for your vehicle and device version. Contact us before ordering if you need clarification about compatibility or installation.

Delivery & Returns

Shipping

Contact us for delivery options, dispatch times and return conditions. Warranty: 12 months.

Returns & Warranty

Warranty: 12 months warranty

Returns window: 30 days from delivery

Return method: By post — return shipping costs apply

Full details are in our returns policy.

Frequently asked questions

Porsche 911 (992.1 / 992.2) Mileage Blocker

£249.00In stock— select options above