Orange Cadillac Escalade in a light grey studio with mileage blocker connected — mileage stopper.
SAVE 9%
2021-2026
Cadillac

Cadillac Escalade Mileage Blocker (5th Gen)

£999.00£1,099.00
Plug & play Multiple modes Speedometer retained Quick removal option available Price varies depending on options

Mileage blocker for the Cadillac Escalade 5th generation (2021–present) full-size luxury SUV. Compatible with Escalade Luxury, Premium Luxury, Sport, Platinum, Sport Platinum, Escalade-V, and ESV long-wheelbase variants. Covers both the Pre-Facelift (2021–2024) and Facelift (2025–present) models. Plug & Play, no cutting or soldering, no permanent modifications. Supplied with an extended harness and quick-release emulator end — the harness stays connected to the BCM and the module clips in and out in seconds. Sometimes referred to as a mileage stopper, the device works by intercepting speed and distance data on the CAN-bus network before it reaches the instrument cluster and memory modules, rather than altering any stored odometer value.

Select your vehicle options

Model Version
Automatic Check Engine/DTC Eraser

Automatic OBD2 dongle — see Product Details below for how it works.

In stock — ships within 1–2 working days

Not sure which variant fits? Send us your car details before ordering — we'll confirm the right fit.

Include your vehicle make, model, model year or generation, and a photo of the instrument cluster if possible.

"Works exactly as described — fitted in under 15 minutes and does exactly what it says on the tin. Very happy with the quality."

— Doel N. · Verified Yotpo buyer

Why buy direct from MileageBlocker.com?

Original Developer & ManufacturerEvery Unit Tested at our WorkshopGenuine 12-Month Manufacturer WarrantyUK Support AvailableSecure & Guaranteed Worldwide Shipping

Key features

  • Vehicle-specific wiring harness — built for the Cadillac Escalade 5th Gen exact connector layout; OEM-style connectors for a factory-quality fit.
  • Extended harness with quick-release emulator — the module clips into and out of the harness end in seconds.
  • Plug & Play installation — no cutting, soldering, or coding required; connects directly to the BCM (Body Control Module) in minutes.
  • Complete mileage stop in active mode — mileage recording is stopped entirely while the device is active; the speedometer continues to read correctly.
  • Fully removable — remove cleanly at any time; no mileage catch-up occurs and use is not detectable through diagnostics after removal.
  • Persistent mode memory — the active mode is retained between ignition cycles; no need to reactivate each time.

Operation & Functional Modes

Activation & Mode Change

Flash the high beams 4 times in quick succession.

Mode 10–1% count
Speedometer works normally
Mode 2100% count
Speedometer works normally

In Mode 1, a very small odometer increment of up to 1% is a normal characteristic of this vehicle's CAN-bus architecture and is expected behaviour.

How it works

Every modern vehicle uses a CAN-bus network — a high-speed digital communication system that links the engine control unit, instrument cluster, gearbox, ABS, and dozens of other modules. Distance data travels across this network continuously, and the instrument cluster reads those signals to update the odometer.

The Cadillac Escalade Mileage Blocker (5th Gen) installs in-line on the specific CAN-bus line that carries distance pulses toward the instrument cluster. It intercepts those signals at the wiring level — before they reach the cluster — and, depending on the selected operating mode, suppresses them entirely or reduces them to a set percentage.

The device uses vehicle-specific, original-type connectors and fits entirely within the existing wiring loom. No wires are cut, no soldering is required, and no coding or software changes are made to the vehicle. Removing the device restores the vehicle to its exact factory state.

Because the device operates at the physical wiring layer — not through the OBD-II port or any software interface — its presence cannot be detected by standard diagnostic equipment. It leaves no trace in the vehicle's fault memory. The device retains the last selected mode between ignition cycles.

Vehicle behaviour notes

The check-engine light may illuminate while the device is active; on 2021–2024 models, Super Cruise and rear-axle steering warnings may also appear temporarily — all clear automatically on deactivation.

Optional OBD2 automatic eraser

The optional OBD2 automatic eraser is a compact dongle that plugs into the vehicle's OBD2 diagnostic port. While connected, it automatically clears certain stored diagnostic trouble codes (DTCs) during the ignition cycle. On supported vehicles, this can help restore remote functions that may otherwise be disabled by fault codes associated with mileage-blocker use.

It does not prevent or remove the check-engine light while the mileage blocker is in use. It clears codes; it does not repair an underlying fault. The remote functions restored depend on the vehicle and selected version.

Important information

This product is designed for off-road, motorsport, dyno testing and vehicle development use. It should not be used to alter the recorded mileage of any vehicle being offered for sale. Please ensure your use is in accordance with the laws that apply in your country.

Compatible variants

Years supported: 2021 – 2026

Select Pre-Facelift (2021–2024) or Facelift (2025–present) to match your model year. For the 4th Gen (2015–2020), see the separate 4th Gen listing.

Compatible with

  • Cadillac Escalade 5th Gen (2021–present), including Luxury, Premium Luxury, Sport, Platinum, Sport Platinum, Escalade-V 6.2L Supercharged, and ESV long-wheelbase. Covers both Pre-Facelift (2021–2024) and Facelift (2025–present) models

Covers 3.0L Duramax diesel, 5.3L V8, 6.2L V8, and Escalade-V Supercharged variants.

Not sure if this fits your vehicle? Contact us with your make, model, year, and a photo of the instrument cluster and we'll confirm.

Specifications

SKURC-CAD-ESCALADE-5TH-GEN
InstallationPlug & Play Installation: Connects directly to the BCM (Body Control Module) via Green and Grey ports—no cutting or soldering required.
ActivationFlash the high beams 4 times in quick succession.
Warranty12 months warranty
Weight0.6 kg
Dimensions22 x 12 x 3 cm
Years supported2021-2026

Compatibility & installation

Use the fitting instructions for your vehicle and device version. Contact us before ordering if you need clarification about compatibility or installation.

Delivery & Returns

Shipping

Contact us for delivery options, dispatch times and return conditions. Warranty: 12 months.

Returns & Warranty

Warranty: 12 months warranty

Returns window: 30 days from delivery

Return method: By post — return shipping costs apply

Full details are in our returns policy.

Frequently asked questions

Cadillac Escalade Mileage Blocker (5th Gen)

£999.00In stock— select options above