Orange BMW 3 Series in a light grey studio with mileage blocker connected — mileage freezer.
See generation options
BMW

BMW 3 Series / M3 Mileage Blocker

From£229.00
Speedometer retained

The most popular BMW mileage blocker we sell — covering the BMW 3 Series from the E90 generation right through to the latest G20 LCI with Curved Display. Compatible with every mainstream variant: 318i, 320i, 330i, 340i, 318d, 320d, 330d, M340i, M3 F80, M3 G80, and M3 G81 Touring. Installs in minutes, Plug & Play, — no soldering, no coding, no permanent changes. Completely undetectable across all BMW diagnostic systems including ISTA and dealer-level scans. Sometimes referred to as a mileage freezer, the BMW 3 Series / M3 Mileage Blocker works by intercepting speed and distance data on the CAN-bus network before it reaches the instrument cluster and memory modules, rather than altering any stored odometer value.

Configure your device

Step 1 — Select your generation

Vehicle generation

E-chassis (older generation)

F-chassis

G-chassis

In stock — ships within 1–2 working days

Not sure which variant fits? Send us your car details before ordering — we'll confirm the right fit.

Include your vehicle make, model, model year or generation, and a photo of the instrument cluster if possible.

"Works exactly as described — fitted in under 15 minutes and does exactly what it says on the tin. Very happy with the quality."

— Doel N. · Verified Yotpo buyer

Why buy direct from MileageBlocker.com?

Original Developer & ManufacturerEvery Unit Tested at our WorkshopGenuine 12-Month Manufacturer WarrantyUK Support AvailableSecure & Guaranteed Worldwide Shipping

Key features

Choosing the right BMW 3 Series device depends on the chassis, installed display and software, not the registration year alone. Select your vehicle and device version to view the applicable instructions. Different devices have separate mode sequences; their modes must not be combined.

  • Vehicle-specific wiring harness — built for the BMW 3 Series's exact connector layout across supported generations; OEM-style connectors for a factory-quality fit.
  • Plug & Play installation — no cutting, soldering, or coding required; connects behind the instrument cluster in minutes.
  • Multiple selectable modes — the number of active modes and their exact behaviour vary by chassis, installed display, and software version; the correct count is shown for your selected vehicle when ordering
  • Generation-matched device — the available modes and their exact behaviour vary by chassis, installed display, and software version; select the correct device for your build when ordering.
  • Fully removable — remove cleanly at any time; no mileage catch-up occurs and use is not detectable through diagnostics after removal.
  • Persistent mode memory — the active mode is retained between ignition cycles; no need to reactivate each time.

Operation & Functional Modes

Activation & Mode Change

Shown for the selected vehicle and device version.

Select your vehicle generation and device version above to see the operating modes for your specific device.

Only the selected device’s mode set applies. Modes from different devices must not be combined.

How it works

Every modern vehicle uses a CAN-bus network — a high-speed digital communication system that links the engine control unit, instrument cluster, gearbox, ABS, and dozens of other modules. Distance data travels across this network continuously, and the instrument cluster reads those signals to update the odometer.

The BMW 3 Series / M3 Mileage Blocker installs in-line on the specific CAN-bus line that carries distance pulses toward the instrument cluster. It intercepts those signals at the wiring level — before they reach the cluster — and, depending on the selected operating mode, suppresses them entirely or reduces them to a set percentage.

The device uses vehicle-specific, original-type connectors and fits entirely within the existing wiring loom. No wires are cut, no soldering is required, and no coding or software changes are made to the vehicle. Removing the device restores the vehicle to its exact factory state.

Because the device operates at the physical wiring layer — not through the OBD-II port or any software interface — its presence cannot be detected by standard diagnostic equipment. It leaves no trace in the vehicle's fault memory. The device retains the last selected mode between ignition cycles.

Vehicle behaviour notes

No warnings or alarms. No effect on vehicle electronics or driving systems.

Extended cable with quick-removal option

The standard cable supplied with the device is sized to reach the installation point directly. The extended cable option adds approximately 45 cm of additional cabling, allowing you to route the module away from the installation point to a more accessible location.

This is particularly useful if you want to tuck the module behind a trim panel that can be removed without tools — for example, a kick panel, lower dashboard cover, or boot side trim.

The quick-removal feature means the module can be disconnected and removed in seconds without disturbing the original wiring — useful for track days, MOT inspections, or any situation where you want the device temporarily out of the vehicle.

To add the extended cable, select "Extended cable with quick removal option" from the Cable Type selector above before adding to cart.

Important information

This product is designed for off-road, motorsport, dyno testing and vehicle development use. It should not be used to alter the recorded mileage of any vehicle being offered for sale. Please ensure your use is in accordance with the laws that apply in your country.

Compatible variants

Years supported: See generation options

BMW fitment depends on chassis, installed display and software, not registration year alone. Choose the exact device and display version; contact support if uncertain.

Compatible with

  • BMW 3 Series E90/E91/E92/E93 (2005–2013, source coverage from 2007), including 318i, 320i, 325i, 330i, 335i, 318d, 320d, 325d, 330d, M3 E92
  • F30 Saloon, F31 Touring, F34 Gran Turismo, F35 (2011–2019), including 318i, 320i, 328i, 330i, 340i, 318d, 320d, 330d, M3 F80
  • G20/G21 pre-Curved Display (2019–2022), including 318i, 320i, 330i, M340i, 318d, 320d, 330d
  • G20/G21 LCI and M3 G80/G81 with Curved Display (2023–2026)

Covers petrol, diesel, PHEV (330e), and all-wheel drive xDrive variants.

Not sure if this fits your vehicle? Contact us with your make, model, year, and a photo of the instrument cluster and we'll confirm.

Specifications

SKURC-BMW-SERIES-3-SERIES
InstallationShown for the selected vehicle/device.
ActivationShown for the selected vehicle and device version.
Warranty12 months warranty
Weight0.3
Dimensions19 x 10 x 2
Cluster typeSelect through the vehicle option
Years supportedSee generation options

Compatibility & installation

Use the fitting instructions for your vehicle and device version. Contact us before ordering if you need clarification about compatibility or installation.

Delivery & Returns

Shipping

Delivery and warranty details depend on the selected device.

Returns & Warranty

Warranty: 12 months warranty

Returns window: 30 days from delivery

Return method: By post — return shipping costs apply

Full details are in our returns policy.

Frequently asked questions

BMW 3 Series / M3 Mileage Blocker

£0.00In stock— select options above